fix download issues when using scale

internal/config/orchestrator.go

@@ -35,6 +35,16 @@ type Orchestrator struct {
 		Plugin           string `yaml:"plugin" env-default:"calico"`
 		ServiceAddresses string `yaml:"service_addresses" env-default:"10.233.0.0/18"`
 		PodsSubnet       string `yaml:"pods_subnet" env-default:"10.233.64.0/18"`
+		Calico           struct {
+			EnableBpf bool `yaml:"enable_bpf"`
+		} `yaml:"calico"`
+		Cilium struct {
+			EnableBpf bool `yaml:"enable_bpf"`
+			Hubble    struct {
+				Install       bool `yaml:"install"`
+				EnableMetrics bool `yaml:"enable_metrics"`
+			} `yaml:"hubble"`
+		} `yaml:"cilium"`
 	} `yaml:"network"`
 	RegistryMirrors []RegistryMirror `yaml:"registry_mirrors"`
 }

internal/resources/templates/kubespray/inventory/group_vars/k8s_cluster/k8s-net-calico.yml.tmpl

@@ -0,0 +1,131 @@
+---
+# see roles/network_plugin/calico/defaults/main.yml
+
+# the default value of name
+calico_cni_name: k8s-pod-network
+
+## With calico it is possible to distributed routes with border routers of the datacenter.
+## Warning : enabling router peering will disable calico's default behavior ('node mesh').
+## The subnets of each nodes will be distributed by the datacenter router
+# peer_with_router: false
+
+# Enables Internet connectivity from containers
+# nat_outgoing: true
+
+# Enables Calico CNI "host-local" IPAM plugin
+# calico_ipam_host_local: true
+
+# add default ippool name
+# calico_pool_name: "default-pool"
+
+# add default ippool blockSize (defaults kube_network_node_prefix)
+calico_pool_blocksize: 26
+
+# add default ippool CIDR (must be inside kube_pods_subnet, defaults to kube_pods_subnet otherwise)
+# calico_pool_cidr: 1.2.3.4/5
+
+# add default ippool CIDR to CNI config
+# calico_cni_pool: true
+
+# Add default IPV6 IPPool CIDR. Must be inside kube_pods_subnet_ipv6. Defaults to kube_pods_subnet_ipv6 if not set.
+# calico_pool_cidr_ipv6: fd85:ee78:d8a6:8607::1:0000/112
+
+# Add default IPV6 IPPool CIDR to CNI config
+# calico_cni_pool_ipv6: true
+
+# Global as_num (/calico/bgp/v1/global/as_num)
+# global_as_num: "64512"
+
+# If doing peering with node-assigned asn where the globas does not match your nodes, you want this
+# to be true.  All other cases, false.
+# calico_no_global_as_num: false
+
+# You can set MTU value here. If left undefined or empty, it will
+# not be specified in calico CNI config, so Calico will use built-in
+# defaults. The value should be a number, not a string.
+# calico_mtu: 1500
+
+# Configure the MTU to use for workload interfaces and tunnels.
+# - If Wireguard is enabled, subtract 60 from your network MTU (i.e 1500-60=1440)
+# - Otherwise, if VXLAN or BPF mode is enabled, subtract 50 from your network MTU (i.e. 1500-50=1450)
+# - Otherwise, if IPIP is enabled, subtract 20 from your network MTU (i.e. 1500-20=1480)
+# - Otherwise, if not using any encapsulation, set to your network MTU (i.e. 1500)
+# calico_veth_mtu: 1440
+
+# Advertise Cluster IPs
+# calico_advertise_cluster_ips: true
+
+# Advertise Service External IPs
+# calico_advertise_service_external_ips:
+# - x.x.x.x/24
+# - y.y.y.y/32
+
+# Advertise Service LoadBalancer IPs
+# calico_advertise_service_loadbalancer_ips:
+# - x.x.x.x/24
+# - y.y.y.y/16
+
+# Choose data store type for calico: "etcd" or "kdd" (kubernetes datastore)
+# calico_datastore: "kdd"
+
+# Choose Calico iptables backend: "Legacy", "Auto" or "NFT"
+# calico_iptables_backend: "Auto"
+
+# Use typha (only with kdd)
+# typha_enabled: false
+
+# Generate TLS certs for secure typha<->calico-node communication
+# typha_secure: false
+
+# Scaling typha: 1 replica per 100 nodes is adequate
+# Number of typha replicas
+# typha_replicas: 1
+
+# Set max typha connections
+# typha_max_connections_lower_limit: 300
+
+# Set calico network backend: "bird", "vxlan" or "none"
+# bird enable BGP routing, required for ipip and no encapsulation modes
+# calico_network_backend: vxlan
+
+# IP in IP and VXLAN is mutualy exclusive modes.
+# set IP in IP encapsulation mode: "Always", "CrossSubnet", "Never"
+# calico_ipip_mode: 'Never'
+
+# set VXLAN encapsulation mode: "Always", "CrossSubnet", "Never"
+# calico_vxlan_mode: 'Always'
+
+# set VXLAN port and VNI
+# calico_vxlan_vni: 4096
+# calico_vxlan_port: 4789
+
+# Enable eBPF mode
+calico_bpf_enabled: {{ .Orchestrator.Network.Calico.EnableBpf }}
+
+# If you want to use non default IP_AUTODETECTION_METHOD, IP6_AUTODETECTION_METHOD for calico node set this option to one of:
+# * can-reach=DESTINATION
+# * interface=INTERFACE-REGEX
+# see https://docs.projectcalico.org/reference/node/configuration
+# calico_ip_auto_method: "interface=eth.*"
+# calico_ip6_auto_method: "interface=eth.*"
+
+# Set FELIX_MTUIFACEPATTERN, Pattern used to discover the host’s interface for MTU auto-detection.
+# see https://projectcalico.docs.tigera.io/reference/felix/configuration
+# calico_felix_mtu_iface_pattern: "^((en|wl|ww|sl|ib)[opsx].*|(eth|wlan|wwan).*)"
+
+# Choose the iptables insert mode for Calico: "Insert" or "Append".
+# calico_felix_chaininsertmode: Insert
+
+# If you want use the default route interface when you use multiple interface with dynamique route (iproute2)
+# see https://docs.projectcalico.org/reference/node/configuration : FELIX_DEVICEROUTESOURCEADDRESS
+# calico_use_default_route_src_ipaddr: false
+
+# Enable calico traffic encryption with wireguard
+# calico_wireguard_enabled: false
+
+# Under certain situations liveness and readiness probes may need tunning
+# calico_node_livenessprobe_timeout: 10
+# calico_node_readinessprobe_timeout: 10
+
+# Calico apiserver (only with kdd)
+# calico_apiserver_enabled: false

internal/resources/templates/kubespray/inventory/group_vars/k8s_cluster/k8s-net-cilium.yml.tmpl

@@ -0,0 +1,245 @@
+---
+# cilium_version: "v1.12.1"
+
+# Log-level
+# cilium_debug: false
+
+# cilium_mtu: ""
+# cilium_enable_ipv4: true
+# cilium_enable_ipv6: false
+
+# Cilium agent health port
+# cilium_agent_health_port: "9879"
+
+# Identity allocation mode selects how identities are shared between cilium
+# nodes by setting how they are stored. The options are "crd" or "kvstore".
+# - "crd" stores identities in kubernetes as CRDs (custom resource definition).
+#   These can be queried with:
+#     `kubectl get ciliumid`
+# - "kvstore" stores identities in an etcd kvstore.
+# - In order to support External Workloads, "crd" is required
+#   - Ref: https://docs.cilium.io/en/stable/gettingstarted/external-workloads/#setting-up-support-for-external-workloads-beta
+# - KVStore operations are only required when cilium-operator is running with any of the below options:
+#   - --synchronize-k8s-services
+#   - --synchronize-k8s-nodes
+#   - --identity-allocation-mode=kvstore
+#   - Ref: https://docs.cilium.io/en/stable/internals/cilium_operator/#kvstore-operations
+# cilium_identity_allocation_mode: kvstore
+
+# Etcd SSL dirs
+# cilium_cert_dir: /etc/cilium/certs
+# kube_etcd_cacert_file: ca.pem
+# kube_etcd_cert_file: cert.pem
+# kube_etcd_key_file: cert-key.pem
+
+# Limits for apps
+# cilium_memory_limit: 500M
+# cilium_cpu_limit: 500m
+# cilium_memory_requests: 64M
+# cilium_cpu_requests: 100m
+
+# Overlay Network Mode
+# cilium_tunnel_mode: vxlan
+# Optional features
+# cilium_enable_prometheus: false
+# Enable if you want to make use of hostPort mappings
+# cilium_enable_portmap: false
+# Monitor aggregation level (none/low/medium/maximum)
+# cilium_monitor_aggregation: medium
+# The monitor aggregation flags determine which TCP flags which, upon the
+# first observation, cause monitor notifications to be generated.
+#
+# Only effective when monitor aggregation is set to "medium" or higher.
+# cilium_monitor_aggregation_flags: "all"
+# Kube Proxy Replacement mode (strict/partial)
+# cilium_kube_proxy_replacement: partial
+
+# If upgrading from Cilium < 1.5, you may want to override some of these options
+# to prevent service disruptions. See also:
+# http://docs.cilium.io/en/stable/install/upgrade/#changes-that-may-require-action
+# cilium_preallocate_bpf_maps: false
+
+# `cilium_tofqdns_enable_poller` is deprecated in 1.8, removed in 1.9
+# cilium_tofqdns_enable_poller: false
+
+# `cilium_enable_legacy_services` is deprecated in 1.6, removed in 1.9
+# cilium_enable_legacy_services: false
+
+# Unique ID of the cluster. Must be unique across all conneted clusters and
+# in the range of 1 and 255. Only relevant when building a mesh of clusters.
+# This value is not defined by default
+# cilium_cluster_id:
+
+# Deploy cilium even if kube_network_plugin is not cilium.
+# This enables to deploy cilium alongside another CNI to replace kube-proxy.
+# cilium_deploy_additionally: false
+
+# Auto direct nodes routes can be used to advertise pods routes in your cluster
+# without any tunelling (with `cilium_tunnel_mode` sets to `disabled`).
+# This works only if you have a L2 connectivity between all your nodes.
+# You wil also have to specify the variable `cilium_native_routing_cidr` to
+# make this work. Please refer to the cilium documentation for more
+# information about this kind of setups.
+# cilium_auto_direct_node_routes: false
+
+# Allows to explicitly specify the IPv4 CIDR for native routing.
+# When specified, Cilium assumes networking for this CIDR is preconfigured and
+# hands traffic destined for that range to the Linux network stack without
+# applying any SNAT.
+# Generally speaking, specifying a native routing CIDR implies that Cilium can
+# depend on the underlying networking stack to route packets to their
+# destination. To offer a concrete example, if Cilium is configured to use
+# direct routing and the Kubernetes CIDR is included in the native routing CIDR,
+# the user must configure the routes to reach pods, either manually or by
+# setting the auto-direct-node-routes flag.
+# cilium_native_routing_cidr: ""
+
+# Allows to explicitly specify the IPv6 CIDR for native routing.
+# cilium_native_routing_cidr_ipv6: ""
+
+# Enable transparent network encryption.
+# cilium_encryption_enabled: false
+
+# Encryption method. Can be either ipsec or wireguard.
+# Only effective when `cilium_encryption_enabled` is set to true.
+# cilium_encryption_type: "ipsec"
+
+# Enable encryption for pure node to node traffic.
+# This option is only effective when `cilium_encryption_type` is set to `ipsec`.
+# cilium_ipsec_node_encryption: false
+
+# If your kernel or distribution does not support WireGuard, Cilium agent can be configured to fall back on the user-space implementation.
+# When this flag is enabled and Cilium detects that the kernel has no native support for WireGuard,
+# it will fallback on the wireguard-go user-space implementation of WireGuard.
+# This option is only effective when `cilium_encryption_type` is set to `wireguard`.
+# cilium_wireguard_userspace_fallback: false
+
+# IP Masquerade Agent
+# https://docs.cilium.io/en/stable/concepts/networking/masquerading/
+# By default, all packets from a pod destined to an IP address outside of the cilium_native_routing_cidr range are masqueraded
+# cilium_ip_masq_agent_enable: false
+
+### A packet sent from a pod to a destination which belongs to any CIDR from the nonMasqueradeCIDRs is not going to be masqueraded
+# cilium_non_masquerade_cidrs:
+#   - 10.0.0.0/8
+#   - 172.16.0.0/12
+#   - 192.168.0.0/16
+#   - 100.64.0.0/10
+#   - 192.0.0.0/24
+#   - 192.0.2.0/24
+#   - 192.88.99.0/24
+#   - 198.18.0.0/15
+#   - 198.51.100.0/24
+#   - 203.0.113.0/24
+#   - 240.0.0.0/4
+### Indicates whether to masquerade traffic to the link local prefix.
+### If the masqLinkLocal is not set or set to false, then 169.254.0.0/16 is appended to the non-masquerade CIDRs list.
+# cilium_masq_link_local: false
+### A time interval at which the agent attempts to reload config from disk
+# cilium_ip_masq_resync_interval: 60s
+
+# Hubble
+### Enable Hubble without install
+# cilium_enable_hubble: false
+### Enable Hubble Metrics
+cilium_enable_hubble_metrics: {{ .Orchestrator.Network.Cilium.Hubble.EnableMetrics }}
+### if cilium_enable_hubble_metrics: true
+# cilium_hubble_metrics:
+#   - dns
+#   - drop
+#   - tcp
+#   - flow
+#   - icmp
+#   - http
+### Enable Hubble install
+cilium_hubble_install:  {{ .Orchestrator.Network.Cilium.Hubble.Install }}
+### Enable auto generate certs if cilium_hubble_install: true
+cilium_hubble_tls_generate: true
+
+# IP address management mode for v1.9+.
+# https://docs.cilium.io/en/v1.9/concepts/networking/ipam/
+# cilium_ipam_mode: kubernetes
+
+# Extra arguments for the Cilium agent
+# cilium_agent_custom_args: []
+
+# For adding and mounting extra volumes to the cilium agent
+# cilium_agent_extra_volumes: []
+# cilium_agent_extra_volume_mounts: []
+
+# cilium_agent_extra_env_vars: []
+
+# cilium_operator_replicas: 2
+
+# The address at which the cillium operator bind health check api
+# cilium_operator_api_serve_addr: "127.0.0.1:9234"
+
+## A dictionary of extra config variables to add to cilium-config, formatted like:
+##  cilium_config_extra_vars:
+##    var1: "value1"
+##    var2: "value2"
+# cilium_config_extra_vars: {}
+
+# For adding and mounting extra volumes to the cilium operator
+# cilium_operator_extra_volumes: []
+# cilium_operator_extra_volume_mounts: []
+
+# Extra arguments for the Cilium Operator
+# cilium_operator_custom_args: []
+
+# Name of the cluster. Only relevant when building a mesh of clusters.
+# cilium_cluster_name: default
+
+# Make Cilium take ownership over the `/etc/cni/net.d` directory on the node, renaming all non-Cilium CNI configurations to `*.cilium_bak`.
+# This ensures no Pods can be scheduled using other CNI plugins during Cilium agent downtime.
+# Available for Cilium v1.10 and up.
+# cilium_cni_exclusive: true
+
+# Configure the log file for CNI logging with retention policy of 7 days.
+# Disable CNI file logging by setting this field to empty explicitly.
+# Available for Cilium v1.12 and up.
+# cilium_cni_log_file: "/var/run/cilium/cilium-cni.log"
+
+# -- Configure cgroup related configuration
+# -- Enable auto mount of cgroup2 filesystem.
+# When `cilium_cgroup_auto_mount` is enabled, cgroup2 filesystem is mounted at
+# `cilium_cgroup_host_root` path on the underlying host and inside the cilium agent pod.
+# If users disable `cilium_cgroup_auto_mount`, it's expected that users have mounted
+# cgroup2 filesystem at the specified `cilium_cgroup_auto_mount` volume, and then the
+# volume will be mounted inside the cilium agent pod at the same path.
+# Available for Cilium v1.11 and up
+# cilium_cgroup_auto_mount: true
+# -- Configure cgroup root where cgroup2 filesystem is mounted on the host
+# cilium_cgroup_host_root: "/run/cilium/cgroupv2"
+
+# Specifies the ratio (0.0-1.0) of total system memory to use for dynamic
+# sizing of the TCP CT, non-TCP CT, NAT and policy BPF maps.
+# cilium_bpf_map_dynamic_size_ratio: "0.0"
+
+# -- Enables masquerading of IPv4 traffic leaving the node from endpoints.
+# Available for Cilium v1.10 and up
+# cilium_enable_ipv4_masquerade: true
+# -- Enables masquerading of IPv6 traffic leaving the node from endpoints.
+# Available for Cilium v1.10 and up
+# cilium_enable_ipv6_masquerade: true
+
+# -- Enable native IP masquerade support in eBPF
+cilium_enable_bpf_masquerade: {{ .Orchestrator.Network.Cilium.EnableBpf }}
+
+# -- Configure whether direct routing mode should route traffic via
+# host stack (true) or directly and more efficiently out of BPF (false) if
+# the kernel supports it. The latter has the implication that it will also
+# bypass netfilter in the host namespace.
+# cilium_enable_host_legacy_routing: true
+
+# -- Enable use of the remote node identity.
+# ref: https://docs.cilium.io/en/v1.7/install/upgrade/#configmap-remote-node-identity
+# cilium_enable_remote_node_identity: true
+
+# -- Enable the use of well-known identities.
+# cilium_enable_well_known_identities: false
+
+# cilium_enable_bpf_clock_probe: true
+
+# -- Whether to enable CNP status updates.
+# cilium_disable_cnp_status_updates: true

internal/templates/kubespray.go

@@ -5,6 +5,8 @@ var K8S_TEMPLATES = [...][2]string{
 	{"templates/kubespray/inventory/group_vars/all.yml.tmpl", "kubespray/inventory/group_vars/all.yml"},
 	{"templates/kubespray/inventory/group_vars/k8s_cluster/addons.yml.tmpl", "kubespray/inventory/group_vars/k8s_cluster/addons.yml"},
 	{"templates/kubespray/inventory/group_vars/k8s_cluster/k8s-cluster.yml.tmpl", "kubespray/inventory/group_vars/k8s_cluster/k8s-cluster.yml"},
+	{"templates/kubespray/inventory/group_vars/k8s_cluster/k8s-net-calico.yml.tmpl", "kubespray/inventory/group_vars/k8s_cluster/k8s-net-calico.yml"},
+	{"templates/kubespray/inventory/group_vars/k8s_cluster/k8s-net-cilium.yml.tmpl", "kubespray/inventory/group_vars/k8s_cluster/k8s-net-cilium.yml"},
 	{"templates/kubespray/inventory/group_vars/all/containerd.yml.tmpl", "kubespray/inventory/group_vars/all/containerd.yml"},
 }