# Copyright Broadcom, Inc. All Rights Reserved.
# SPDX-License-Identifier: APACHE-2.0

## @section Global parameters
## Global Docker image parameters
## Please, note that this will override the image parameters, including dependencies, configured to use the global value
## Current available global Docker image parameters: imageRegistry, imagePullSecrets and storageClass
##

## @param global.imageRegistry Global Docker image registry
## @param global.imagePullSecrets [array] Global Docker registry secret names as an array
## @param global.defaultStorageClass Global default StorageClass for Persistent Volume(s)
## @param global.storageClass DEPRECATED: use global.defaultStorageClass instead
##
global:
  imageRegistry: ""
  ## E.g.
  ## imagePullSecrets:
  ##   - myRegistryKeySecretName
  ##
  imagePullSecrets: []
  defaultStorageClass: ""
  storageClass: ""
  ## Compatibility adaptations for Kubernetes platforms
  ##
  compatibility:
    ## Compatibility adaptations for Openshift
    ##
    openshift:
      ## @param global.compatibility.openshift.adaptSecurityContext Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)
      ##
      adaptSecurityContext: auto
## @section Common parameters
##

## @param nameOverride String to partially override contour.fullname include (will maintain the release name)
##
nameOverride: ""
## @param fullnameOverride String to fully override contour.fullname template
##
fullnameOverride: ""
## @param namespaceOverride String to fully override common.names.namespace
##
namespaceOverride: ""
## @param kubeVersion Force target Kubernetes version (using Helm capabilities if not set)
##
kubeVersion: ""
## @param extraDeploy [array] Array of extra objects to deploy with the release
##
extraDeploy: []
## @param commonLabels Labels to add to all deployed objects
##
commonLabels: {}
## @param commonAnnotations Annotations to add to all deployed objects
##
commonAnnotations: {}
## Diagnostic mode in the deployment
##
diagnosticMode:
  ## @param diagnosticMode.enabled Enable diagnostic mode (all probes will be disabled and the command will be overridden)
  ##
  enabled: false
  ## @param diagnosticMode.command [array] Command to override all containers in the deployment
  ##
  command:
    - sleep
  ## @param diagnosticMode.args [array] Args to override all containers in the deployment
  ##
  args:
    - infinity
## @section Contour parameters
##

## To configure Contour, you must specify ONE of the following two options.
## @param existingConfigMap Specifies the name of an externally-defined ConfigMap to use as the configuration (this is mutually exclusive with `configInline`)
## Helm will not manage the contents of this ConfigMap, it is your responsibility to create it.
## e.g:
##   existingConfigMap: contour
##
existingConfigMap: ""
## @param configInline [object] Specifies Contour's configuration directly in YAML format
## When configInline is used, Helm manages Contour's configuration ConfigMap as
## part of the release, and existingConfigMap is ignored.
## Refer to https://projectcontour.io/docs/latest/configuration for available options.
##
configInline:
  disablePermitInsecure: false
  tls:
    fallback-certificate: {}
  accesslog-format: envoy
contour:
  ## @param contour.enabled Contour Deployment creation.
  ##
  enabled: true
  ## @param contour.image.registry [default: REGISTRY_NAME] Contour image registry
  ## @param contour.image.repository [default: REPOSITORY_NAME/contour] Contour image name
  ## @skip contour.image.tag Contour image tag
  ## @param contour.image.digest Contour image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
  ## @param contour.image.pullPolicy Contour Image pull policy
  ## @param contour.image.pullSecrets [array] Contour Image pull secrets
  ## @param contour.image.debug Enable image debug mode
  ##
  image:
    registry: docker.io
    repository: bitnami/contour
    tag: 1.30.0-debian-12-r3
    digest: ""
    ## Specify a imagePullPolicy
    ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
    ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
    debug: false
  ## @param contour.contourConfigName Contour Deployment with ContourConfiguration CRD.
  #
  contourConfigName: "contour"
  ## @param contour.configPath Contour Deployment with configmap.
  ##
  configPath: true
  ## @param contour.replicaCount Number of Contour Pod replicas
  #
  replicaCount: 1
  ## @param contour.priorityClassName Priority class assigned to the pods
  ## ref: https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/#priorityclass
  ##
  priorityClassName: ""
  ## @param contour.schedulerName Name of the k8s scheduler (other than default)
  ## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
  ##
  schedulerName: ""
  ## @param contour.terminationGracePeriodSeconds In seconds, time the given to the Contour pod needs to terminate gracefully
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods
  ##
  terminationGracePeriodSeconds: ""
  ## @param contour.topologySpreadConstraints Topology Spread Constraints for pod assignment
  ## https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/
  ## The value is evaluated as a template
  ##
  topologySpreadConstraints: []
  ## Configures the ports the Envoy proxy listens on
  ## @param contour.containerPorts.xds Set xds port inside Contour pod
  ## @param contour.containerPorts.metrics Set metrics port inside Contour pod
  ##
  containerPorts:
    xds: 8001
    metrics: 8000
  ## @param contour.automountServiceAccountToken Mount Service Account token in pod
  ##
  automountServiceAccountToken: true
  ## @param contour.hostAliases [array] Add deployment host aliases
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []
  ## @param contour.updateStrategy Strategy to use to update Pods
  ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#update-strategies
  ##
  updateStrategy: {}
  ## @param contour.extraArgs [array] Extra arguments passed to Contour container
  ##
  extraArgs: []
  ## Contour container resource requests and limits
  ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## ref: https://projectcontour.io/guides/resource-limits/
  ## We usually recommend not to specify default resources and to leave this as a conscious
  ## choice for the user. This also increases chances charts run on environments with little
  ## resources, such as Minikube. If you do want to specify resources, uncomment the following
  ## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
  ## @param contour.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if contour.resources is set (contour.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "nano"
  ## @param contour.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## @param contour.manageCRDs Manage the creation, upgrade and deletion of Contour CRDs.
  ##
  manageCRDs: true
  ## @param contour.envoyServiceNamespace Namespace of the envoy service to inspect for Ingress status details.
  ##
  envoyServiceNamespace: ""
  ## @param contour.envoyServiceName Name of the envoy service to inspect for Ingress status details.
  ##
  envoyServiceName: ""
  ## @param contour.leaderElectionResourceName Name of the contour (Lease) leader election will lease.
  ##
  leaderElectionResourceName: ""
  ## @param contour.ingressStatusAddress Address to set in Ingress object status. It is exclusive with `envoyServiceName` and `envoyServiceNamespace`.
  ##
  ingressStatusAddress: ""
  ## @param contour.podAffinityPreset Contour Pod affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAffinityPreset: ""
  ## @param contour.podAntiAffinityPreset Contour Pod anti-affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## @param contour.podLabels [object] Extra labels for Contour pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## @param contour.lifecycleHooks lifecycleHooks for the container to automate configuration before or after startup.
  ##
  lifecycleHooks: {}
  ## @param contour.customLivenessProbe Override default liveness probe
  ##
  customLivenessProbe: {}
  ## @param contour.customReadinessProbe Override default readiness probe
  ##
  customReadinessProbe: {}
  ## @param contour.customStartupProbe Override default startup probe
  ##
  customStartupProbe: {}
  ## Node affinity preset
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ## @param contour.nodeAffinityPreset.type Contour Node affinity preset type. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## @param contour.nodeAffinityPreset.key Contour Node label key to match Ignored if `affinity` is set.
  ## @param contour.nodeAffinityPreset.values [array] Contour Node label values to match. Ignored if `affinity` is set.
  ##
  nodeAffinityPreset:
    type: ""
    ## E.g.
    ## key: "kubernetes.io/e2e-az-name"
    ##
    key: ""
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param contour.command Override default command
  ##
  command: []
  ## @param contour.args Override default args
  ##
  args: []
  ## @param contour.affinity [object] Affinity for Contour pod assignment
  ## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## Note: podAffinityPreset, podAntiAffinityPreset, and  nodeAffinityPreset will be ignored when it's set
  ##
  affinity: {}
  ## @param contour.nodeSelector [object] Node labels for Contour pod assignment
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
  ##
  nodeSelector: {}
  ## @param contour.tolerations [array] Tolerations for Contour pod assignment
  ## Ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## @param contour.podAnnotations [object] Contour Pod annotations
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param contour.serviceAccount.create Create a serviceAccount for the Contour pod
  ## @param contour.serviceAccount.name Use the serviceAccount with the specified name, a name is generated using the fullname template
  ## @param contour.serviceAccount.automountServiceAccountToken Automount service account token for the server service account
  ## @param contour.serviceAccount.annotations Annotations for service account. Evaluated as a template. Only used if `create` is `true`.
  ##
  serviceAccount:
    create: true
    name: ""
    automountServiceAccountToken: false
    annotations: {}
  ## Contour Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param contour.podSecurityContext.enabled Default backend Pod securityContext
  ## @param contour.podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
  ## @param contour.podSecurityContext.sysctls Set kernel settings using the sysctl interface
  ## @param contour.podSecurityContext.supplementalGroups Set filesystem extra groups
  ## @param contour.podSecurityContext.fsGroup Set Default backend Pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroupChangePolicy: Always
    sysctls: []
    supplementalGroups: []
    fsGroup: 1001
  ## Envoy container security context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param contour.containerSecurityContext.enabled Enabled contour containers' Security Context
  ## @param contour.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param contour.containerSecurityContext.runAsUser Set contour containers' Security Context runAsUser
  ## @param contour.containerSecurityContext.runAsGroup Set contour containers' Security Context runAsGroup
  ## @param contour.containerSecurityContext.runAsNonRoot Set contour containers' Security Context runAsNonRoot
  ## @param contour.containerSecurityContext.readOnlyRootFilesystem Set read only root file system pod's Security Conte
  ## @param contour.containerSecurityContext.privileged Set contour container's Security Context privileged
  ## @param contour.containerSecurityContext.allowPrivilegeEscalation Set contour container's Security Context allowPrivilegeEscalation
  ## @param contour.containerSecurityContext.capabilities.drop List of capabilities to be dropped
  ## @param contour.containerSecurityContext.seccompProfile.type Set container's Security Context seccomp profile
  ##
  containerSecurityContext:
    enabled: true
    seLinuxOptions: {}
    runAsUser: 1001
    runAsGroup: 1001
    runAsNonRoot: true
    privileged: false
    allowPrivilegeEscalation: false
    capabilities:
      drop: ["ALL"]
    seccompProfile:
      type: "RuntimeDefault"
    readOnlyRootFilesystem: true
  ## @param contour.livenessProbe.enabled Enable/disable the Liveness probe
  ## @param contour.livenessProbe.initialDelaySeconds Delay before liveness probe is initiated
  ## @param contour.livenessProbe.periodSeconds How often to perform the probe
  ## @param contour.livenessProbe.timeoutSeconds When the probe times out
  ## @param contour.livenessProbe.failureThreshold Minimum consecutive failures for the probe to be considered failed after having succeeded.
  ## @param contour.livenessProbe.successThreshold Minimum consecutive successes for the probe to be considered successful after having failed.
  ##
  livenessProbe:
    enabled: true
    initialDelaySeconds: 120
    periodSeconds: 20
    timeoutSeconds: 5
    failureThreshold: 6
    successThreshold: 1
  ## @param contour.readinessProbe.enabled Enable/disable the readiness probe
  ## @param contour.readinessProbe.initialDelaySeconds Delay before readiness probe is initiated
  ## @param contour.readinessProbe.periodSeconds How often to perform the probe
  ## @param contour.readinessProbe.timeoutSeconds When the probe times out
  ## @param contour.readinessProbe.failureThreshold Minimum consecutive failures for the probe to be considered failed after having succeeded.
  ## @param contour.readinessProbe.successThreshold Minimum consecutive successes for the probe to be considered successful after having failed.
  ##
  readinessProbe:
    enabled: true
    initialDelaySeconds: 15
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 3
    successThreshold: 1
  ## @param contour.startupProbe.enabled Enable/disable the startup probe
  ## @param contour.startupProbe.initialDelaySeconds Delay before startup probe is initiated
  ## @param contour.startupProbe.periodSeconds How often to perform the probe
  ## @param contour.startupProbe.timeoutSeconds When the probe times out
  ## @param contour.startupProbe.failureThreshold Minimum consecutive failures for the probe to be considered failed after having succeeded.
  ## @param contour.startupProbe.successThreshold Minimum consecutive successes for the probe to be considered successful after having failed.
  ##
  startupProbe:
    enabled: false
    initialDelaySeconds: 15
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 3
    successThreshold: 1
  ## Contour certgen configs
  ##
  certgen:
    ## @param contour.certgen.serviceAccount.create Create a serviceAccount for the Contour pod
    ## @param contour.certgen.serviceAccount.name Use the serviceAccount with the specified name, a name is generated using the fullname template
    ## @param contour.certgen.serviceAccount.automountServiceAccountToken Automount service account token for the server service account
    ## @param contour.certgen.serviceAccount.annotations Annotations for service account. Evaluated as a template. Only used if `create` is `true`.
    ##
    serviceAccount:
      create: true
      name: ""
      automountServiceAccountToken: false
      annotations: {}
    ## @param contour.certgen.certificateLifetime Generated certificate lifetime (in days).
    ##
    certificateLifetime: 365
    ## @param contour.certgen.automountServiceAccountToken Mount Service Account token in pod
    ##
    automountServiceAccountToken: true
    ## Network Policies
    ## Ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
    ##
    networkPolicy:
      ## @param contour.certgen.networkPolicy.enabled Specifies whether a NetworkPolicy should be created
      ##
      enabled: true
      ## @param contour.certgen.networkPolicy.allowExternal Don't require server label for connections
      ## The Policy model to apply. When set to false, only pods with the correct
      ## server label will have network access to the ports server is listening
      ## on. When true, server will accept connections from any source
      ## (with the correct destination port).
      ##
      allowExternal: true
      ## @param contour.certgen.networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
      ##
      allowExternalEgress: true
      ## @param contour.certgen.networkPolicy.kubeAPIServerPorts [array] List of possible endpoints to kube-apiserver (limit to your cluster settings to increase security)
      ##
      kubeAPIServerPorts: [443, 6443, 8443]
      ## @param contour.certgen.networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
      ## e.g:
      ## extraIngress:
      ##   - ports:
      ##       - port: 1234
      ##     from:
      ##       - podSelector:
      ##           - matchLabels:
      ##               - role: frontend
      ##       - podSelector:
      ##           - matchExpressions:
      ##               - key: role
      ##                 operator: In
      ##                 values:
      ##                   - frontend
      extraIngress: []
      ## @param contour.certgen.networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
      ## e.g:
      ## extraEgress:
      ##   - ports:
      ##       - port: 1234
      ##     to:
      ##       - podSelector:
      ##           - matchLabels:
      ##               - role: frontend
      ##       - podSelector:
      ##           - matchExpressions:
      ##               - key: role
      ##                 operator: In
      ##                 values:
      ##                   - frontend
      ##
      extraEgress: []
      ## @param contour.certgen.networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
      ## @param contour.certgen.networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
      ##
      ingressNSMatchLabels: {}
      ingressNSPodMatchLabels: {}
  ## @param contour.tlsExistingSecret Name of the existingSecret to be use in Contour deployment. If it is not nil `contour.certgen` will be disabled.
  ## It will override `tlsExistingSecret`
  ##
  tlsExistingSecret: ""
  ## Contour Service properties
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#multi-port-services
  ##
  service:
    ## @param contour.service.type Service type
    ##
    type: ClusterIP
    ## @param contour.service.ports.xds Contour service xds port
    ## @param contour.service.ports.metrics Contour service xds port
    ##
    ports:
      xds: 8001
      metrics: 8000
    ## Node ports to expose
    ## @param contour.service.nodePorts.xds Node port for HTTP
    ## NOTE: choose port between <30000-32767>
    ##
    nodePorts:
      xds: ""
    ## @param contour.service.clusterIP Contour service Cluster IP
    ## e.g.:
    ## clusterIP: None
    ##
    clusterIP: ""
    ## @param contour.service.loadBalancerIP Contour service Load Balancer IP
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-loadbalancer
    ##
    loadBalancerIP: ""
    ## @param contour.service.loadBalancerSourceRanges Contour service Load Balancer sources
    ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
    ## e.g:
    ## loadBalancerSourceRanges:
    ##   - 10.10.10.0/24
    ##
    loadBalancerSourceRanges: []
    ## @param contour.service.loadBalancerClass Contour service Load Balancer Class
    ## ref https://kubernetes.io/docs/concepts/services-networking/service/#load-balancer-class
    ##
    loadBalancerClass: ""
    ## @param contour.service.externalTrafficPolicy Contour service external traffic policy
    ## ref https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
    ##
    externalTrafficPolicy: Cluster
    ## @param contour.service.annotations Additional custom annotations for Contour service
    ##
    annotations: {}
    ## @param contour.service.extraPorts Extra port to expose on Contour service
    ##
    extraPorts: []
    ## @param contour.service.sessionAffinity Session Affinity for Kubernetes service, can be "None" or "ClientIP"
    ## If "ClientIP", consecutive client requests will be directed to the same Pod
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
    ##
    sessionAffinity: None
    ## @param contour.service.sessionAffinityConfig Additional settings for the sessionAffinity
    ## sessionAffinityConfig:
    ##   clientIP:
    ##     timeoutSeconds: 300
    ##
    sessionAffinityConfig: {}
  ## Network Policies
  ## Ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
  ##
  networkPolicy:
    ## @param contour.networkPolicy.enabled Specifies whether a NetworkPolicy should be created
    ##
    enabled: true
    ## @param contour.networkPolicy.allowExternal Don't require server label for connections
    ## The Policy model to apply. When set to false, only pods with the correct
    ## server label will have network access to the ports server is listening
    ## on. When true, server will accept connections from any source
    ## (with the correct destination port).
    ##
    allowExternal: true
    ## @param contour.networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
    ##
    allowExternalEgress: true
    ## @param contour.networkPolicy.kubeAPIServerPorts [array] List of possible endpoints to kube-apiserver (limit to your cluster settings to increase security)
    ##
    kubeAPIServerPorts: [443, 6443, 8443]
    ## @param contour.networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraIngress:
    ##   - ports:
    ##       - port: 1234
    ##     from:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    extraIngress: []
    ## @param contour.networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraEgress:
    ##   - ports:
    ##       - port: 1234
    ##     to:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraEgress: []
    ## @param contour.networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
    ## @param contour.networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
    ##
    ingressNSMatchLabels: {}
    ingressNSPodMatchLabels: {}
  ## @param contour.initContainers [array] Attach additional init containers to Contour pods
  ## For example:
  ## initContainers:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##
  initContainers: []
  ## @param contour.sidecars [array] Add additional sidecar containers to the Contour pods
  ## Example:
  ## sidecars:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##     ports:
  ##       - name: portname
  ##         containerPort: 1234
  ##
  sidecars: []
  ## @param contour.extraVolumes [array] Array to add extra volumes
  ##
  extraVolumes: []
  ## @param contour.extraVolumeMounts [array] Array to add extra mounts (normally used with extraVolumes)
  ##
  extraVolumeMounts: []
  ## @param contour.extraEnvVars [array] Array containing extra env vars to be added to all Contour containers
  ## For example:
  ## extraEnvVars:
  ##  - name: MY_ENV_VAR
  ##    value: env_var_value
  ##
  extraEnvVars: []
  ## @param contour.extraEnvVarsCM ConfigMap containing extra env vars to be added to all Contour containers
  ##
  extraEnvVarsCM: ""
  ## @param contour.extraEnvVarsSecret Secret containing extra env vars to be added to all Contour containers
  ##
  extraEnvVarsSecret: ""
  ## @param contour.ingressClass.name Name of the ingress class to route through this controller.
  ## @param contour.ingressClass.create Whether to create or not the IngressClass resource
  ## @param contour.ingressClass.default Mark IngressClass resource as default for cluster
  ##
  ## DEPRECATED: Use a map instead
  ## You can use the the 'contour.ingressClass' as a string to indicate the ingress
  ## class name. This will skip the creation of an IngressClass resource.
  ## e.g:
  ## ingressClass: contour
  ##
  ingressClass:
    name: ""
    create: true
    default: true
  ## @param contour.debug Enable Contour debug log level
  ##
  debug: false
  ## @param contour.logFormat Set contour log-format. Default text, either text or json.
  ##
  logFormat: text
  ## @param contour.kubernetesDebug Contour kubernetes debug log level, Default 0, minimum 0, maximum 9.
  ##
  kubernetesDebug: 0
  ## @param contour.rootNamespaces Restrict Contour to searching these namespaces for root ingress routes.
  ##
  rootNamespaces: ""
  ## Exposes configuration of Envoy's Overload Manager through Contour's bootstrapping process
  ## When 95% of max heap size is reached for an Envoy, "shrink heap" operation is triggered.
  ## When 98% of max heap size is reached for an Envoy, it no longer accepts requests.
  ## https://projectcontour.io/docs/main/config/overload-manager/
  ## @param contour.overloadManager.enabled Enable Overload Manager
  ## @param contour.overloadManager.maxHeapBytes Overload Manager's maximum heap size in bytes
  ##
  overloadManager:
    enabled: false
    maxHeapBytes: "2147483648"
  ## PodDisruptionBudget for default backend
  ## Contour Pod Disruption Budget configuration
  ## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb/
  ## @param contour.pdb.create Enable Pod Disruption Budget configuration
  ## @param contour.pdb.minAvailable Minimum number/percentage of Default backend pods that should remain scheduled
  ## @param contour.pdb.maxUnavailable Maximum number/percentage of Default backend pods that should remain scheduled
  ##
  pdb:
    create: true
    minAvailable: ""
    maxUnavailable: ""

## @section Envoy parameters
##
envoy:
  ## @param envoy.enabled Envoy Proxy creation
  ##
  enabled: true
  ## Bitnami Envoy image
  ## ref: https://hub.docker.com/r/bitnami/envoy/tags/
  ## @param envoy.image.registry [default: REGISTRY_NAME] Envoy Proxy image registry
  ## @param envoy.image.repository [default: REPOSITORY_NAME/envoy] Envoy Proxy image repository
  ## @skip envoy.image.tag Envoy Proxy image tag (immutable tags are recommended)
  ## @param envoy.image.digest Envoy Proxy image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
  ## @param envoy.image.pullPolicy Envoy image pull policy
  ## @param envoy.image.pullSecrets [array] Envoy image pull secrets
  ##
  image:
    registry: docker.io
    repository: bitnami/envoy
    tag: 1.31.0-debian-12-r0
    digest: ""
    ## Specify a imagePullPolicy
    ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
    ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## @param envoy.priorityClassName Priority class assigned to the pods
  ## ref: https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/#priorityclass
  ##
  priorityClassName: ""
  ## @param envoy.schedulerName Name of the k8s scheduler (other than default)
  ## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
  ##
  schedulerName: ""
  ## @param envoy.topologySpreadConstraints Topology Spread Constraints for pod assignment
  ## https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/
  ## The value is evaluated as a template
  ##
  topologySpreadConstraints: []
  ## @param envoy.extraArgs [array] Extra arguments passed to Envoy container
  ##
  extraArgs: []
  ## @param envoy.automountServiceAccountToken Mount Service Account token in pod
  ##
  automountServiceAccountToken: false
  ## @param envoy.hostAliases [array] Add deployment host aliases
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []
  ## Envoy container resource requests and limits
  ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## ref: https://projectcontour.io/guides/resource-limits/
  ## We usually recommend not to specify default resources and to leave this as a conscious
  ## choice for the user. This also increases chances charts run on environments with little
  ## resources, such as Minikube. If you do want to specify resources, uncomment the following
  ## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
  ## @param envoy.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if envoy.resources is set (envoy.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "nano"
  ## @param envoy.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## @param envoy.command Override default command
  ##
  command: []
  ## @param envoy.args Override default args
  ##
  args: []
  ## @param envoy.shutdownManager.enabled Contour shutdownManager sidecar
  ## @param envoy.shutdownManager.extraArgs [array] Extra arguments passed to shutdown container
  ## @param envoy.shutdownManager.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if envoy.shutdownManager.resources is set (envoy.shutdownManager.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ## @param envoy.shutdownManager.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## @param envoy.shutdownManager.containerPorts.http Specify Port for shutdown container
  ## @param envoy.shutdownManager.lifecycleHooks lifecycleHooks for the container to automate configuration before or after startup.
  ##
  shutdownManager:
    lifecycleHooks: {}
    extraArgs: []
    enabled: true
    resourcesPreset: "nano"
    containerPorts:
      http: 8090
    ## Example:
    ## resources:
    ##   requests:
    ##     cpu: 2
    ##     memory: 512Mi
    ##   limits:
    ##     cpu: 3
    ##     memory: 1024Mi
    resources: {}
    ## Shutdown Manager container security context
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
    ## @param envoy.shutdownManager.containerSecurityContext.enabled Enabled envoy shutdownManager containers' Security Context
    ## @param envoy.shutdownManager.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
    ## @param envoy.shutdownManager.containerSecurityContext.runAsUser Set envoy shutdownManager containers' Security Context runAsUser
    ## @param envoy.shutdownManager.containerSecurityContext.runAsGroup Set contour containers' Security Context runAsGroup
    ## @param envoy.shutdownManager.containerSecurityContext.runAsNonRoot Set envoy shutdownManager containers' Security Context runAsNonRoot
    ## @param envoy.shutdownManager.containerSecurityContext.readOnlyRootFilesystem Set read only root file system pod's Security Conte
    ## @param envoy.shutdownManager.containerSecurityContext.privileged Set envoy.shutdownManager container's Security Context privileged
    ## @param envoy.shutdownManager.containerSecurityContext.allowPrivilegeEscalation Set envoy shutdownManager container's Security Context allowPrivilegeEscalation
    ## @param envoy.shutdownManager.containerSecurityContext.capabilities.drop List of capabilities to be dropped
    ## @param envoy.shutdownManager.containerSecurityContext.seccompProfile.type Set container's Security Context seccomp profile
    ##
    containerSecurityContext:
      enabled: true
      seLinuxOptions: {}
      runAsUser: 1001
      runAsGroup: 1001
      runAsNonRoot: true
      privileged: false
      allowPrivilegeEscalation: false
      capabilities:
        drop: ["ALL"]
      seccompProfile:
        type: "RuntimeDefault"
      readOnlyRootFilesystem: true
    ## @param envoy.shutdownManager.livenessProbe.enabled Enable livenessProbe
    ## @param envoy.shutdownManager.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
    ## @param envoy.shutdownManager.livenessProbe.periodSeconds Period seconds for livenessProbe
    ## @param envoy.shutdownManager.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
    ## @param envoy.shutdownManager.livenessProbe.failureThreshold Failure threshold for livenessProbe
    ## @param envoy.shutdownManager.livenessProbe.successThreshold Success threshold for livenessProbe
    ##
    livenessProbe:
      enabled: true
      initialDelaySeconds: 120
      periodSeconds: 20
      timeoutSeconds: 5
      failureThreshold: 6
      successThreshold: 1
    ## @param envoy.shutdownManager.readinessProbe.enabled Enable/disable the readiness probe
    ## @param envoy.shutdownManager.readinessProbe.initialDelaySeconds Delay before readiness probe is initiated
    ## @param envoy.shutdownManager.readinessProbe.periodSeconds How often to perform the probe
    ## @param envoy.shutdownManager.readinessProbe.timeoutSeconds When the probe times out
    ## @param envoy.shutdownManager.readinessProbe.failureThreshold Minimum consecutive failures for the probe to be considered failed after having succeeded.
    ## @param envoy.shutdownManager.readinessProbe.successThreshold Minimum consecutive successes for the probe to be considered successful after having failed.
    ##
    readinessProbe:
      enabled: true
      initialDelaySeconds: 10
      periodSeconds: 3
      timeoutSeconds: 1
      failureThreshold: 3
      successThreshold: 1
    ## @param envoy.shutdownManager.startupProbe.enabled Enable/disable the startup probe
    ## @param envoy.shutdownManager.startupProbe.initialDelaySeconds Delay before startup probe is initiated
    ## @param envoy.shutdownManager.startupProbe.periodSeconds How often to perform the probe
    ## @param envoy.shutdownManager.startupProbe.timeoutSeconds When the probe times out
    ## @param envoy.shutdownManager.startupProbe.failureThreshold Minimum consecutive failures for the probe to be considered failed after having succeeded.
    ## @param envoy.shutdownManager.startupProbe.successThreshold Minimum consecutive successes for the probe to be considered successful after having failed.
    ##
    startupProbe:
      enabled: false
      initialDelaySeconds: 15
      periodSeconds: 10
      timeoutSeconds: 5
      failureThreshold: 3
      successThreshold: 1
    ## @param envoy.shutdownManager.customLivenessProbe Override default liveness probe
    ##
    customLivenessProbe: {}
    ## @param envoy.shutdownManager.customReadinessProbe Override default readiness probe
    ##
    customReadinessProbe: {}
    ## @param envoy.shutdownManager.customStartupProbe Override default startup probe
    ##
    customStartupProbe: {}
  ## Envoy Initconfig initcontainer security context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param envoy.initConfig.containerSecurityContext.enabled Enabled envoy initConfig containers' Security Context
  ## @param envoy.initConfig.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param envoy.initConfig.containerSecurityContext.runAsUser Set envoy initConfig containers' Security Context runAsUser
  ## @param envoy.initConfig.containerSecurityContext.runAsGroup Set envoy initConfig containers' Security Context runAsUser
  ## @param envoy.initConfig.containerSecurityContext.runAsNonRoot Set envoy initConfig containers' Security Context runAsNonRoot
  ## @param envoy.initConfig.containerSecurityContext.readOnlyRootFilesystem Set read only root file system pod's Security Conte
  ## @param envoy.initConfig.containerSecurityContext.privileged Set contraller container's Security Context privileged
  ## @param envoy.initConfig.containerSecurityContext.allowPrivilegeEscalation Set contraller container's Security Context allowPrivilegeEscalation
  ## @param envoy.initConfig.containerSecurityContext.capabilities.drop List of capabilities to be dropped
  ## @param envoy.initConfig.containerSecurityContext.seccompProfile.type Set container's Security Context seccomp profile
  ##
  initConfig:
    containerSecurityContext:
      enabled: true
      seLinuxOptions: {}
      runAsUser: 1001
      runAsGroup: 1001
      runAsNonRoot: true
      privileged: false
      allowPrivilegeEscalation: false
      capabilities:
        drop: ["ALL"]
      seccompProfile:
        type: "RuntimeDefault"
      readOnlyRootFilesystem: true
  ## @param envoy.kind Install as deployment or daemonset
  ##
  kind: daemonset
  ## @param envoy.replicaCount Desired number of Controller pods
  ##
  replicaCount: 1
  ## @param envoy.lifecycleHooks lifecycleHooks for the container to automate configuration before or after startup.
  ##
  lifecycleHooks: {}
  ## @param envoy.updateStrategy [object] Strategy to use to update Pods
  ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/deployment/#strategy
  ## e.g:
  ## updateStrategy:
  ##  type: RollingUpdate
  ##  rollingUpdate:
  ##    maxSurge: 25%
  ##    maxUnavailable: 25%
  ##
  updateStrategy:
    type: RollingUpdate
  ## @param envoy.minReadySeconds The minimum number of seconds for which a newly created Pod should be ready
  ##
  minReadySeconds: 0
  ## @param envoy.revisionHistoryLimit The number of old history to retain to allow rollback
  ##
  revisionHistoryLimit: 10
  ## Controller Autoscaling configuration
  ## @param envoy.autoscaling.enabled Enable autoscaling for Controller
  ## @param envoy.autoscaling.minReplicas Minimum number of Controller replicas
  ## @param envoy.autoscaling.maxReplicas Maximum number of Controller replicas
  ## @param envoy.autoscaling.targetCPU Target CPU utilization percentage
  ## @param envoy.autoscaling.targetMemory Target Memory utilization percentage
  ## @param envoy.autoscaling.behavior HPA Behavior
  ##
  autoscaling:
    enabled: false
    minReplicas: 1
    maxReplicas: 11
    targetCPU: ""
    targetMemory: ""
    behavior: {}
  ## @param envoy.podAffinityPreset Envoy Pod affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ## Allowed values: soft, hard
  ##
  podAffinityPreset: ""
  ## @param envoy.podAntiAffinityPreset Envoy Pod anti-affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ## Allowed values: soft, hard
  ##
  podAntiAffinityPreset: ""
  ## Node affinity preset
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ## @param envoy.nodeAffinityPreset.type Envoy Node affinity preset type. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## @param envoy.nodeAffinityPreset.key Envoy Node label key to match Ignored if `affinity` is set.
  ## @param envoy.nodeAffinityPreset.values [array] Envoy Node label values to match. Ignored if `affinity` is set.
  ##
  nodeAffinityPreset:
    type: ""
    key: ""
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param envoy.affinity [object] Affinity for Envoy pod assignment
  ## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## Note: podAffinityPreset, podAntiAffinityPreset, and  nodeAffinityPreset will be ignored when it's set
  ##
  affinity: {}
  ## @param envoy.nodeSelector [object] Node labels for Envoy pod assignment
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
  ##
  nodeSelector: {}
  ## @param envoy.tolerations [array] Tolerations for Envoy pod assignment
  ## Ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## @param envoy.podAnnotations [object] Envoy Pod annotations
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param envoy.podLabels Extra labels for Envoy pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## Pod security context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param envoy.podSecurityContext.enabled Envoy Pod securityContext
  ## @param envoy.podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
  ## @param envoy.podSecurityContext.supplementalGroups Set filesystem extra groups
  ## @param envoy.podSecurityContext.fsGroup User ID for the for the mounted volumes
  ## @param envoy.podSecurityContext.sysctls Array of sysctl options to allow
  ##
  podSecurityContext:
    enabled: true
    fsGroupChangePolicy: Always
    supplementalGroups: []
    fsGroup: 0
    sysctls: []
  ## Envoy container security context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param envoy.containerSecurityContext.enabled Enabled envoy containers' Security Context
  ## @param envoy.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param envoy.containerSecurityContext.runAsUser Set envoy containers' Security Context runAsUser
  ## @param envoy.containerSecurityContext.runAsGroup Set envoy containers' Security Context runAsGroup
  ## @param envoy.containerSecurityContext.runAsNonRoot Set envoy containers' Security Context runAsNonRoot
  ## @param envoy.containerSecurityContext.readOnlyRootFilesystem Set read only root file system pod's Security Conte
  ## @param envoy.containerSecurityContext.privileged Set envoy container's Security Context privileged
  ## @param envoy.containerSecurityContext.allowPrivilegeEscalation Set envoy container's Security Context allowPrivilegeEscalation
  ## @param envoy.containerSecurityContext.capabilities.drop List of capabilities to be dropped
  ## @param envoy.containerSecurityContext.seccompProfile.type Set container's Security Context seccomp profile
  ##
  containerSecurityContext:
    enabled: true
    seLinuxOptions: {}
    runAsUser: 1001
    runAsGroup: 1001
    runAsNonRoot: true
    privileged: false
    allowPrivilegeEscalation: false
    capabilities:
      drop: ["ALL"]
    seccompProfile:
      type: "RuntimeDefault"
    readOnlyRootFilesystem: true
  ## @param envoy.hostNetwork Envoy Pod host network access
  ## ref: https://kubernetes.io/docs/concepts/policy/pod-security-policy/#host-namespaces
  ##
  hostNetwork: false
  ## @param envoy.dnsPolicy Envoy Pod Dns Policy's DNS Policy
  ## ref: https://kubernetes.io/docs/concepts/services-networking/dns-pod-service/#pod-s-dns-policy
  ##
  dnsPolicy: ClusterFirst
  ## @param envoy.tlsExistingSecret Name of the existingSecret to be use in Envoy deployment
  ##
  tlsExistingSecret: ""
  ## @param envoy.serviceAccount.create Specifies whether a ServiceAccount should be created
  ## @param envoy.serviceAccount.name The name of the ServiceAccount to use. If not set and create is true, a name is generated using the fullname template
  ## @param envoy.serviceAccount.automountServiceAccountToken Whether to auto mount API credentials for a service account
  ## @param envoy.serviceAccount.annotations Annotations for service account. Evaluated as a template. Only used if `create` is `true`.
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/#use-the-default-service-account-to-access-the-api-server
  ##
  serviceAccount:
    create: true
    name: ""
    automountServiceAccountToken: false
    annotations: {}
  ## @param envoy.livenessProbe.enabled Enable livenessProbe
  ## @param envoy.livenessProbe.port LivenessProbe port
  ## @param envoy.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param envoy.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param envoy.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param envoy.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param envoy.livenessProbe.successThreshold Success threshold for livenessProbe
  ##
  livenessProbe:
    enabled: true
    port: 8002
    initialDelaySeconds: 120
    periodSeconds: 20
    timeoutSeconds: 5
    failureThreshold: 6
    successThreshold: 1
  ## @param envoy.readinessProbe.enabled Enable/disable the readiness probe
  ## @param envoy.readinessProbe.port ReadinessProbe port
  ## @param envoy.readinessProbe.initialDelaySeconds Delay before readiness probe is initiated
  ## @param envoy.readinessProbe.periodSeconds How often to perform the probe
  ## @param envoy.readinessProbe.timeoutSeconds When the probe times out
  ## @param envoy.readinessProbe.failureThreshold Minimum consecutive failures for the probe to be considered failed after having succeeded.
  ## @param envoy.readinessProbe.successThreshold Minimum consecutive successes for the probe to be considered successful after having failed.
  ##
  readinessProbe:
    enabled: true
    port: 8002
    initialDelaySeconds: 10
    periodSeconds: 3
    timeoutSeconds: 1
    failureThreshold: 3
    successThreshold: 1
  ## @param envoy.startupProbe.enabled Enable/disable the startup probe
  ## @param envoy.startupProbe.port StartupProbe port
  ## @param envoy.startupProbe.initialDelaySeconds Delay before startup probe is initiated
  ## @param envoy.startupProbe.periodSeconds How often to perform the probe
  ## @param envoy.startupProbe.timeoutSeconds When the probe times out
  ## @param envoy.startupProbe.failureThreshold Minimum consecutive failures for the probe to be considered failed after having succeeded.
  ## @param envoy.startupProbe.successThreshold Minimum consecutive successes for the probe to be considered successful after having failed.
  ##
  startupProbe:
    enabled: false
    port: 8002
    initialDelaySeconds: 15
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 3
    successThreshold: 1
  ## @param envoy.customLivenessProbe Override default liveness probe
  ##
  customLivenessProbe: {}
  ## @param envoy.customReadinessProbe Override default readiness probe
  ##
  customReadinessProbe: {}
  ## @param envoy.customStartupProbe Override default startup probe
  ##
  customStartupProbe: {}
  ## @param envoy.terminationGracePeriodSeconds Envoy termination grace period in seconds
  ##
  terminationGracePeriodSeconds: 300
  ## @param envoy.logLevel Envoy log level
  ##
  logLevel: info
  ## Envoy Service properties
  ##
  service:
    ## @param envoy.service.name envoy service name
    ##
    name: ""
    ## The multi az feature renders multiple service, so you could attach different service provider loadbalancer to it.
    ## This feature is primarily used to achieve a high availability with multiple loadbalancer
    ## @param envoy.service.multiAz.enabled enables the rendering of the multiple services
    ## @param envoy.service.multiAz.zones defines different zones their annotations and loadBalancerIPs
    ##
    multiAz:
      enabled: false
      zones: []
    ## Example
    ## - name: "zone1"
    ##   loadBalancerIP: "1.2.3.4"
    ##   annotations:
    ##    service.beta.kubernetes.io/loadbalancer-zone: zone1
    ## - name: "zone2"
    ##   loadBalancerIP: "5.6.7.8"
    ##   annotations:
    ##    service.beta.kubernetes.io/loadbalancer-zone: zone2
    ##
    ## @param envoy.service.targetPorts [object] Map the controller service HTTP/HTTPS port
    ##
    targetPorts:
      http: http
      https: https
      metrics: metrics
    ## @param envoy.service.type Type of Envoy service to create
    ##
    type: NodePort
    ## @param envoy.service.externalTrafficPolicy Envoy Service external cluster policy. If `envoy.service.type` is NodePort or LoadBalancer
    ##
    externalTrafficPolicy: Local
    ## @param envoy.service.labels Labels to add to te envoy service
    ##
    labels: {}
    ## @param envoy.service.clusterIP Internal envoy cluster service IP
    ## e.g.:
    ## clusterIP: None
    ##
    clusterIP: ""
    ## @param envoy.service.externalIPs [array] Envoy service external IP addresses
    ##
    externalIPs: []
    ## @param envoy.service.loadBalancerIP IP address to assign to load balancer (if supported)
    ##
    loadBalancerIP: ""
    ## @param envoy.service.loadBalancerSourceRanges [array] List of IP CIDRs allowed access to load balancer (if supported)
    ##
    loadBalancerSourceRanges: []
    ## @param envoy.service.loadBalancerClass Envoy service Load Balancer Class
    ## ref https://kubernetes.io/docs/concepts/services-networking/service/#load-balancer-class
    ##
    loadBalancerClass: ""
    ## @param envoy.service.ipFamilyPolicy [string], support SingleStack, PreferDualStack and RequireDualStack
    ##
    ipFamilyPolicy: ""
    ## @param envoy.service.ipFamilies [array] List of IP families (e.g. IPv4, IPv6) assigned to the service.
    ## Ref: https://kubernetes.io/docs/concepts/services-networking/dual-stack/
    ## E.g.
    ## ipFamilies:
    ##   - IPv6
    ##
    ipFamilies: []
    ## @param envoy.service.annotations [object] Annotations for Envoy service
    ##
    annotations: {}
    ports:
      ## @param envoy.service.ports.http Sets service http port
      ##
      http: 80
      ## @param envoy.service.ports.https Sets service https port
      ##
      https: 443
      ## @param envoy.service.ports.metrics Sets service metrics port
      ##
      metrics: 8002
    ## Specify the nodePort(s) value(s) for the LoadBalancer and NodePort service types.
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
    ## @param envoy.service.nodePorts.http HTTP Port. If `envoy.service.type` is NodePort and this is non-empty
    ## @param envoy.service.nodePorts.https HTTPS Port. If `envoy.service.type` is NodePort and this is non-empty
    ##
    nodePorts:
      http: ""
      https: ""
    ## @param envoy.service.extraPorts [array] Extra ports to expose (normally used with the `sidecar` value)
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#multi-port-services
    ##
    extraPorts: []
    ## @param envoy.service.sessionAffinity Session Affinity for Kubernetes service, can be "None" or "ClientIP"
    ## If "ClientIP", consecutive client requests will be directed to the same Pod
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
    ##
    sessionAffinity: None
    ## @param envoy.service.sessionAffinityConfig Additional settings for the sessionAffinity
    ## sessionAffinityConfig:
    ##   clientIP:
    ##     timeoutSeconds: 300
    ##
    sessionAffinityConfig: {}
  ## Network Policies
  ## Ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
  ##
  networkPolicy:
    ## @param envoy.networkPolicy.enabled Specifies whether a NetworkPolicy should be created
    ##
    enabled: true
    ## @param envoy.networkPolicy.allowExternal Don't require server label for connections
    ## The Policy model to apply. When set to false, only pods with the correct
    ## server label will have network access to the ports server is listening
    ## on. When true, server will accept connections from any source
    ## (with the correct destination port).
    ##
    allowExternal: true
    ## @param envoy.networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
    ##
    allowExternalEgress: true
    ## @param envoy.networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraIngress:
    ##   - ports:
    ##       - port: 1234
    ##     from:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    extraIngress: []
    ## @param envoy.networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraEgress:
    ##   - ports:
    ##       - port: 1234
    ##     to:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraEgress: []
    ## @param envoy.networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
    ## @param envoy.networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
    ##
    ingressNSMatchLabels: {}
    ingressNSPodMatchLabels: {}
  ## @param envoy.useHostPort.http Enable/disable `hostPort` for TCP/80
  ## @param envoy.useHostPort.https Enable/disable `hostPort` TCP/443
  ## @param envoy.useHostPort.metrics Enable/disable `hostPort` for TCP/8002
  ##
  useHostPort:
    http: true
    https: true
    metrics: false
  ## @param envoy.useHostIP Enable/disable `hostIP`
  ##
  useHostIP: false
  ## @param envoy.hostPorts.http Sets `hostPort` http port
  ## @param envoy.hostPorts.https Sets `hostPort` https port
  ## @param envoy.hostPorts.metrics Sets `hostPort` metrics port
  ##
  hostPorts:
    http: 80
    https: 443
    metrics: 8002
  ## @param envoy.hostIPs.http Sets `hostIP` http IP
  ## @param envoy.hostIPs.https Sets `hostIP` https IP
  ## @param envoy.hostIPs.metrics Sets `hostIP` metrics IP
  ##
  hostIPs:
    http: 127.0.0.1
    https: 127.0.0.1
    metrics: 127.0.0.1
  ## Configures the ports the Envoy proxy listens on
  ## @param envoy.containerPorts.http Sets http port inside Envoy pod  (change this to >1024 to run envoy as a non-root user)
  ## @param envoy.containerPorts.https Sets https port inside Envoy pod  (change this to >1024 to run envoy as a non-root user)
  ## @param envoy.containerPorts.metrics Sets metrics port inside Envoy pod (change this to >1024 to run envoy as a non-root user)
  ##
  containerPorts:
    http: 8080
    https: 8443
    metrics: 8002
  ## @param envoy.initContainers [array] Attach additional init containers to Envoy pods
  ## For example:
  ## initContainers:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##
  initContainers: []
  ## @param envoy.sidecars Add additional sidecar containers to the Envoy pods
  ## Example:
  ## sidecars:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##     ports:
  ##       - name: portname
  ##         containerPort: 1234
  ##
  sidecars: []
  ## @param envoy.extraVolumes [array] Array to add extra volumes
  ##
  extraVolumes: []
  ## @param envoy.extraVolumeMounts [array] Array to add extra mounts (normally used with extraVolumes)
  ##
  extraVolumeMounts: []
  ## @param envoy.extraEnvVars [array] Array containing extra env vars to be added to all Envoy containers
  ## For example:
  ## extraEnvVars:
  ##  - name: MY_ENV_VAR
  ##    value: env_var_value
  ##
  extraEnvVars: []
  ## @param envoy.extraEnvVarsCM ConfigMap containing extra env vars to be added to all Envoy containers
  ##
  extraEnvVarsCM: ""
  ## @param envoy.extraEnvVarsSecret Secret containing extra env vars to be added to all Envoy containers
  ##
  extraEnvVarsSecret: ""
  ## PodDisruptionBudget for default backend
  ## Envoy Pod Disruption Budget configuration
  ## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb/
  ## @param envoy.pdb.create Enable Pod Disruption Budget configuration
  ## @param envoy.pdb.minAvailable Minimum number/percentage of Default backend pods that should remain scheduled
  ## @param envoy.pdb.maxUnavailable Maximum number/percentage of Default backend pods that should remain scheduled
  ##
  pdb:
    create: true
    minAvailable: ""
    maxUnavailable: ""

## @section Default backend parameters
##

## Default 404 backend
##
defaultBackend:
  ## @param defaultBackend.enabled Enable a default backend based on NGINX
  ##
  enabled: false
  ## Bitnami NGINX image
  ## ref: https://hub.docker.com/r/bitnami/nginx/tags/
  ## @param defaultBackend.image.registry [default: REGISTRY_NAME] Default backend image registry
  ## @param defaultBackend.image.repository [default: REPOSITORY_NAME/nginx] Default backend image name
  ## @skip defaultBackend.image.tag Default backend image tag
  ## @param defaultBackend.image.digest Default backend image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
  ## @param defaultBackend.image.pullPolicy Image pull policy
  ## @param defaultBackend.image.pullSecrets [array] Specify docker-registry secret names as an array
  ##
  image:
    registry: docker.io
    repository: bitnami/nginx
    tag: 1.27.0-debian-12-r6
    digest: ""
    ## Specify a imagePullPolicy
    ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
    ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## Example:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## @param defaultBackend.extraArgs [object] Additional command line arguments to pass to NGINX container
  ##
  extraArgs: {}
  ## @param defaultBackend.lifecycleHooks lifecycleHooks for the container to automate configuration before or after startup.
  ##
  lifecycleHooks: {}
  ## @param defaultBackend.extraEnvVars [array] Array containing extra env vars to be added to all Contour containers
  ## For example:
  ## extraEnvVars:
  ##  - name: MY_ENV_VAR
  ##    value: env_var_value
  ##
  extraEnvVars: []
  ## @param defaultBackend.extraEnvVarsCM ConfigMap containing extra env vars to be added to all Contour containers
  ##
  extraEnvVarsCM: ""
  ## @param defaultBackend.extraEnvVarsSecret Secret containing extra env vars to be added to all Contour containers
  ##
  extraEnvVarsSecret: ""
  ## @param defaultBackend.extraVolumes [array] Array to add extra volumes
  ##
  extraVolumes: []
  ## @param defaultBackend.extraVolumeMounts [array] Array to add extra mounts (normally used with extraVolumes)
  ##
  extraVolumeMounts: []
  ## @param defaultBackend.initContainers [array] Attach additional init containers to the http backend pods
  ## For example:
  ## initContainers:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##
  initContainers: []
  ## @param defaultBackend.sidecars [array] Add additional sidecar containers to the default backend
  ## Example:
  ## sidecars:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##     ports:
  ##       - name: portname
  ##         containerPort: 1234
  ##
  sidecars: []
  ## Configures the ports the http backend listens on
  ## @param defaultBackend.containerPorts.http Set http port inside Contour pod
  ##
  containerPorts:
    http: 8001
  ## @param defaultBackend.updateStrategy Strategy to use to update Pods
  ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#update-strategies
  ##
  updateStrategy: {}
  ## @param defaultBackend.command Override default command
  ##
  command: []
  ## @param defaultBackend.args Override default args
  ##
  args: []
  ## @param defaultBackend.hostAliases [array] Add deployment host aliases
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []
  ## @param defaultBackend.replicaCount Desired number of default backend pods
  ##
  replicaCount: 1
  ## Default backend pods' Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param defaultBackend.podSecurityContext.enabled Default backend Pod securityContext
  ## @param defaultBackend.podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
  ## @param defaultBackend.podSecurityContext.sysctls Set kernel settings using the sysctl interface
  ## @param defaultBackend.podSecurityContext.supplementalGroups Set filesystem extra groups
  ## @param defaultBackend.podSecurityContext.fsGroup Set Default backend Pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroupChangePolicy: Always
    sysctls: []
    supplementalGroups: []
    fsGroup: 1001
  ## Default backend containers' Security Context (only main container)
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param defaultBackend.containerSecurityContext.enabled Enabled defaultBackend containers' Security Context
  ## @param defaultBackend.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param defaultBackend.containerSecurityContext.runAsUser Set defaultBackend containers' Security Context runAsUser
  ## @param defaultBackend.containerSecurityContext.runAsGroup Set defaultBackend containers' Security Context runAsGroup
  ## @param defaultBackend.containerSecurityContext.runAsNonRoot Set defaultBackend containers' Security Context runAsNonRoot
  ## @param defaultBackend.containerSecurityContext.readOnlyRootFilesystem Set read only root file system pod's Security Conte
  ## @param defaultBackend.containerSecurityContext.privileged Set defaultBackend container's Security Context privileged
  ## @param defaultBackend.containerSecurityContext.allowPrivilegeEscalation Set defaultBackend container's Security Context allowPrivilegeEscalation
  ## @param defaultBackend.containerSecurityContext.capabilities.drop List of capabilities to be dropped
  ## @param defaultBackend.containerSecurityContext.seccompProfile.type Set container's Security Context seccomp profile
  ##
  containerSecurityContext:
    enabled: true
    seLinuxOptions: {}
    runAsUser: 1001
    runAsGroup: 1001
    runAsNonRoot: true
    privileged: false
    allowPrivilegeEscalation: false
    capabilities:
      drop: ["ALL"]
    seccompProfile:
      type: "RuntimeDefault"
    readOnlyRootFilesystem: true
  ## Default backend containers' resource requests and limits
  ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## We usually recommend not to specify default resources and to leave this as a conscious
  ## choice for the user. This also increases chances charts run on environments with little
  ## resources, such as Minikube.
  ## @param defaultBackend.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if defaultBackend.resources is set (defaultBackend.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "nano"
  ## @param defaultBackend.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## Default backend containers' liveness probe. Evaluated as a template.
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
  ## @param defaultBackend.livenessProbe.enabled Enable livenessProbe
  ## @param defaultBackend.livenessProbe.httpGet [object] Path, port and scheme for the livenessProbe
  ## @param defaultBackend.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param defaultBackend.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param defaultBackend.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param defaultBackend.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param defaultBackend.livenessProbe.successThreshold Success threshold for livenessProbe
  ##
  livenessProbe:
    enabled: true
    failureThreshold: 3
    initialDelaySeconds: 30
    periodSeconds: 10
    successThreshold: 1
    timeoutSeconds: 5
  ## Default backend containers' readiness probe. Evaluated as a template.
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
  ## @param defaultBackend.readinessProbe.enabled Enable readinessProbe
  ## @param defaultBackend.readinessProbe.httpGet [object] Path, port and scheme for the readinessProbe
  ## @param defaultBackend.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
  ## @param defaultBackend.readinessProbe.periodSeconds Period seconds for readinessProbe
  ## @param defaultBackend.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
  ## @param defaultBackend.readinessProbe.failureThreshold Failure threshold for readinessProbe
  ## @param defaultBackend.readinessProbe.successThreshold Success threshold for readinessProbe
  ##
  readinessProbe:
    enabled: true
    failureThreshold: 6
    initialDelaySeconds: 0
    periodSeconds: 5
    successThreshold: 1
    timeoutSeconds: 5
  ## @param defaultBackend.startupProbe.enabled Enable/disable the startup probe
  ## @param defaultBackend.startupProbe.initialDelaySeconds Delay before startup probe is initiated
  ## @param defaultBackend.startupProbe.periodSeconds How often to perform the probe
  ## @param defaultBackend.startupProbe.timeoutSeconds When the probe times out
  ## @param defaultBackend.startupProbe.failureThreshold Minimum consecutive failures for the probe to be considered failed after having succeeded.
  ## @param defaultBackend.startupProbe.successThreshold Minimum consecutive successes for the probe to be considered successful after having failed.
  ##
  startupProbe:
    enabled: false
    initialDelaySeconds: 15
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 3
    successThreshold: 1
  ## @param defaultBackend.customLivenessProbe [object] Override default liveness probe, it overrides the default one (evaluated as a template)
  ##
  customLivenessProbe: {}
  ## @param defaultBackend.customReadinessProbe [object] Override default readiness probe, it overrides the default one (evaluated as a template)
  ##
  customReadinessProbe: {}
  ## @param defaultBackend.customStartupProbe Override default startup probe
  ##
  customStartupProbe: {}
  ## @param defaultBackend.podLabels [object] Extra labels for Controller pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## @param defaultBackend.podAnnotations [object] Annotations for Controller pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param defaultBackend.priorityClassName Priority class assigned to the pods
  ## ref: https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/#priorityclass
  ##
  priorityClassName: ""
  ## @param defaultBackend.schedulerName Name of the k8s scheduler (other than default)
  ## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
  ##
  schedulerName: ""
  ## @param defaultBackend.terminationGracePeriodSeconds In seconds, time the given to the default backend pod needs to terminate gracefully
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods
  ##
  terminationGracePeriodSeconds: 60
  ## @param defaultBackend.topologySpreadConstraints Topology Spread Constraints for pod assignment
  ## https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/
  ## The value is evaluated as a template
  ##
  topologySpreadConstraints: []
  ## @param defaultBackend.podAffinityPreset Pod affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ## Allowed values: soft, hard
  ##
  podAffinityPreset: ""
  ## @param defaultBackend.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ## Allowed values: soft, hard
  ##
  podAntiAffinityPreset: soft
  ## Node affinity preset
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ## @param defaultBackend.nodeAffinityPreset.type Node affinity preset type. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## @param defaultBackend.nodeAffinityPreset.key Node label key to match. Ignored if `affinity` is set.
  ## @param defaultBackend.nodeAffinityPreset.values [array] Node label values to match. Ignored if `affinity` is set.
  ##
  nodeAffinityPreset:
    type: ""
    key: ""
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param defaultBackend.affinity [object] Affinity for pod assignment. Evaluated as a template.
  ## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## Note: defaultBackend.podAffinityPreset, defaultBackend.podAntiAffinityPreset, and defaultBackend.nodeAffinityPreset will be ignored when it's set
  ##
  affinity: {}
  ## @param defaultBackend.nodeSelector [object] Node labels for pod assignment. Evaluated as a template.
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
  ##
  nodeSelector: {}
  ## @param defaultBackend.tolerations [array] Tolerations for pod assignment. Evaluated as a template.
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## Default backend Service parameters
  ## @param defaultBackend.service.type Service type
  ## @param defaultBackend.service.ports.http Service port
  ## @param defaultBackend.service.annotations Annotations to add to the service
  ##
  service:
    type: ClusterIP
    ports:
      http: 80
    annotations: {}
  ## Network Policies
  ## Ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
  ##
  networkPolicy:
    ## @param defaultBackend.networkPolicy.enabled Specifies whether a NetworkPolicy should be created
    ##
    enabled: true
    ## @param defaultBackend.networkPolicy.allowExternal Don't require server label for connections
    ## The Policy model to apply. When set to false, only pods with the correct
    ## server label will have network access to the ports server is listening
    ## on. When true, server will accept connections from any source
    ## (with the correct destination port).
    ##
    allowExternal: true
    ## @param defaultBackend.networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
    ##
    allowExternalEgress: true
    ## @param defaultBackend.networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraIngress:
    ##   - ports:
    ##       - port: 1234
    ##     from:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    extraIngress: []
    ## @param defaultBackend.networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraEgress:
    ##   - ports:
    ##       - port: 1234
    ##     to:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraEgress: []
    ## @param defaultBackend.networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
    ## @param defaultBackend.networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
    ##
    ingressNSMatchLabels: {}
    ingressNSPodMatchLabels: {}
  ## PodDisruptionBudget for default backend
  ## Default backend Pod Disruption Budget configuration
  ## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb/
  ## @param defaultBackend.pdb.create Enable Pod Disruption Budget configuration
  ## @param defaultBackend.pdb.minAvailable Minimum number/percentage of Default backend pods that should remain scheduled
  ## @param defaultBackend.pdb.maxUnavailable Maximum number/percentage of Default backend pods that should remain scheduled
  ##
  pdb:
    create: true
    minAvailable: ""
    maxUnavailable: ""
## Ingress parameters
##
ingress:
  ## @param ingress.enabled Ingress configuration enabled
  ## Ref: https://kubernetes.io/docs/concepts/services-networking/ingress/
  ##
  ## Enable Ingress.
  ##
  enabled: false
  ## @param ingress.apiVersion Force Ingress API version (automatically detected if not set)
  ##
  apiVersion: ""
  ## @param ingress.certManager Add annotations for cert-manager
  ##
  certManager: false
  ## @param ingress.annotations Annotations to be added to the web ingress.
  ## Example:
  ##   kubernetes.io/ingress.class: nginx
  ##   kubernetes.io/tls-acme: 'true'
  ##
  annotations: {}
  ## Either `hosts` or `rulesOverride` must be provided if Ingress is enabled.
  ## `hosts` sets up the Ingress with default rules per provided hostname.
  ## @param ingress.hostname Hostname for the Ingress object
  ##
  hostname: contour.local
  ## @param ingress.path The Path to Concourse
  ##
  path: /
  ## @param ingress.rulesOverride Ingress rules override
  ## Either `hosts` or `rulesOverride` must be provided if Ingress is enabled.
  ## `rulesOverride` allows the user to define the full set of ingress rules, for more complex Ingress setups.
  ##
  rulesOverride: []
  ## @param ingress.selfSigned Create a TLS secret for this ingress record using self-signed certificates generated by Helm
  ##
  selfSigned: false
  ## @param ingress.ingressClassName IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)
  ##
  ingressClassName: ""
  ## @param ingress.extraPaths Add additional arbitrary paths that may need to be added to the ingress under the main host.
  ## For example: The ALB ingress controller requires a special rule for handling SSL redirection.
  ##
  extraPaths: []
  ## @param ingress.tls TLS configuration.
  ## Secrets must be manually created in the namespace.
  ## Example:
  ##   - secretName: concourse-web-tls
  ##     hosts:
  ##       - concourse.domain.com
  ##
  tls: false
  ## @param ingress.pathType Ingress Path type
  ##
  pathType: ImplementationSpecific
  ## @param ingress.extraHosts The list of additional hostnames to be covered with this ingress record.
  ## Most likely the hostname above will be enough, but in the event more hosts are needed, this is an array
  ## extraHosts:
  ## - name: concourse.local
  ##   path: /
  ##
  extraHosts: []
  ## @param ingress.extraTls The tls configuration for additional hostnames to be covered with this ingress record.
  ## see: https://kubernetes.io/docs/concepts/services-networking/ingress/#tls
  ## extraTls:
  ## - hosts:
  ##     - concourse.local
  ##   secretName: concourse.local-tls
  ##
  extraTls: []
  ## @param ingress.secrets If you're providing your own certificates, please use this to add the certificates as secrets
  ## key and certificate should start with -----BEGIN CERTIFICATE----- or
  ## -----BEGIN RSA PRIVATE KEY-----
  ##
  ## name should line up with a tlsSecret set further up
  ## If you're using cert-manager, this is unneeded, as it will create the secret for you if it is not set
  ##
  ## It is also possible to create and manage the certificates outside of this helm chart
  ## Please see README.md for more information
  ## Example:
  ## - name: concourse.local-tls
  ##   key:
  ##   certificate:
  ##
  secrets: []
  ## @param ingress.extraRules Additional rules to be covered with this ingress record
  ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#ingress-rules
  ## e.g:
  ## extraRules:
  ## - host: example.local
  ##     http:
  ##       path: /
  ##       backend:
  ##         service:
  ##           name: example-svc
  ##           port:
  ##             name: http
  ##
  extraRules: []
## @section Metrics parameters
##
metrics:
  ## Prometheus Operator service monitors
  ##
  serviceMonitor:
    ## @param metrics.serviceMonitor.namespace Specify if the servicemonitors will be deployed into a different namespace (blank deploys into same namespace as chart)
    ##
    namespace: ""
    ## @param metrics.serviceMonitor.enabled Specify if a servicemonitor will be deployed for prometheus-operator.
    ##
    enabled: false
    ## @param metrics.serviceMonitor.jobLabel Specify the jobLabel to use for the prometheus-operator
    ##
    jobLabel: "app.kubernetes.io/name"
    ## @param metrics.serviceMonitor.interval Specify the scrape interval if not specified use default prometheus scrapeIntervall, the Prometheus default scrape interval is used.
    ##
    interval: ""
    ## @param metrics.serviceMonitor.metricRelabelings [array] Specify additional relabeling of metrics.
    ##
    metricRelabelings: []
    ## @param metrics.serviceMonitor.relabelings [array] Specify general relabeling.
    ##
    relabelings: []
    ## @param metrics.serviceMonitor.honorLabels Specify honorLabels parameter to add the scrape endpoint
    ##
    honorLabels: false
    ## @param metrics.serviceMonitor.scrapeTimeout The timeout after which the scrape is ended
    ##
    scrapeTimeout: ""
    ## @param metrics.serviceMonitor.selector Specify honorLabels parameter to add the scrape endpoint
    ##
    selector: {}
    ## @param metrics.serviceMonitor.labels Extra labels for the ServiceMonitor
    ##
    labels: {}
  ## Prometheus Operator prometheusRules
  ##
  prometheusRule:
    ## @param metrics.prometheusRule.enabled Creates a Prometheus Operator prometheusRule
    ##
    enabled: false
    ## @param metrics.prometheusRule.namespace Namespace for the prometheusRule Resource (defaults to the Release Namespace)
    ##
    namespace: ""
    ## @param metrics.prometheusRule.additionalLabels Additional labels that can be used so prometheusRule will be discovered by Prometheus
    ##
    additionalLabels: {}
    ## @param metrics.prometheusRule.rules Prometheus Rule definitions
    ##
    rules: []
## @section Other parameters
##

## @param rbac.create Create the RBAC roles for API accessibility
##
rbac:
  create: true
  ## @param rbac.rules [array] Custom RBAC rules to set
  ## e.g:
  ## rules:
  ##   - apiGroups:
  ##       - ""
  ##     resources:
  ##       - pods
  ##     verbs:
  ##       - get
  ##       - list
  ##
  rules: []
## @param tlsExistingSecret Name of the existingSecret to be use in both contour and envoy. If it is not nil `contour.certgen` will be disabled.
##
tlsExistingSecret: ""